43 Foot Tankmaster Tank Chassis Specifications
New Chassis Made By Cheetah in USA.
| Function | Carries one 20 ft ISO Container. Meets all DOT, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of chassis manufacture and applicable to operation in the United States. |
| Overall Chassis Length | 43 ft. 5 in. |
| Overall Chassis Width | 96 inches |
| Tandem Location | 78 5/8 inches |
| Kingpin Location | 15 inches |
| Frame Height at Container | 41 1/2 inches |
| Main Beams | Fabricated I-Beam Tapered at rear; Grade 100 flanges |
| Cross Member | Fabricated Channels |
| Upper Coupler Assembly | Pick up plate is 1/4” thick and extends approximately 18” behind the kingpin and is reinforced fore and aft by ¼ inch formed channels |
| Bolsters | Fabricated channel |
| Lift Device | Lift ready, but not included |
| Twist Lock & Slide Pins | Meets ISO standards and requirements. |
| ICC Bumper | None |
| Landing Gear | Jost two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity. |
| Landing Gear Axle Type | Standard |
| Landing Gear Foot Group | 10 in. by 10 in. Low profile sandshoe |
| Crank Handle Location | Road side handle |
| Axle Quantity | Two Axles |
| Suspension Type | Spring-Ride |
| Axle Centers | 109 inch |
| Springs | Two Leaf |
| Hub Type | Hub piloted for disc wheels |
| Hub Material | Steel |
| Drum | Outboard mounted |
| Rim/Wheels | 8 1/4 X 22.5 hub piloted tubeless |
| Wheel/Rim Color | White |
| Tire Size | 255/70R 22.5 |
| Axle Type | TN |
| Wall Thickness | 1/2 inch |
| Axle Track | 71.5 |
| Lubrication | Oil 90 wt. |
| Slack Adjusters | Automatic |
| Brake System Type | 2S1M |
| Brake Chambers | 30/30 |
| Electrical System | 12 volt, 7-way split pin receptacle plug; modular wiring harness |
| Light Attachment | Grommet mounted |
| Light Type | LED |
| Metal Preparation | Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning” |
| Primer | 70% Zinc Rich Primer |
| Topcoat | Urethane Topcoat |
| Color | Black |
| Markings | FHWA plate, tare weight, 2 small Cheetah logos. |
| Customer Decals | Furnished by Customer |
| Conspicuity | Meets DOT requirements |
| Registration Holder | Plastic with clear screw on top |
| Mud Flaps | Cheetah Supplied |
| Fenders | Plastic |
| Rear Deck | 2 x 2 x ¼” mesh |
| Step | Roadside Rear |
| Steel & Fastners | All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50. All structural fasteners are Grade 5 or better and are zinc coated |
| GVWR | 80,000 lbs |
| Weight | Approximately 7,300 lbs. |
