20 – 40 Foot Heavy Duty HD Tri Axle Container Chassis Specifications
New Chassis Made By Cheetah in USA.
| Function | Carries one 20 ft (60,000 lbs) or one 40 ft (63,600 lbs) ISO container at capacity. Meets all DOT, TOFC, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of manufacture and applicable to operation in the United States. |
| Overall Chassis Length | Closed: 32 ft 11 in Extended: 40 ft 6 in |
| Overall Chassis Width | 96 inches |
| Axle Location | 88 5/8 inches |
| Slide Range | 91 3/8 inches total |
| Kindpin Height | 47 inches |
| Kingpin Location | 12 inches from rear face of front bolster |
| Maximum Rear Height | 48 inches |
| Main Beam | Fabricated I-Beam |
| Bogie Beams | Fabricated I-Beam |
| Cross Member | All cross members are formed from 7 ga steel |
| Upper Coupler Assembly | Pick up plate is 5/16″ thick and extends approximately 18″ behind the kingpin and is reinforced fore and aft by 1/4″ formed channels |
| Bracing | Lateral Bracing |
| Front Bolster | 7 ga thick channel 9″ high x 6″ deep with 10 ga stiffeners |
| Intermediate Bolster | 5/16″ wall x 6″ x 8″ tube with 1/2″ end plates and retractable |
| Rear Bolster | Fixed height rectangular box-type beam with drop-in style, low profile twistlocks |
| Twist Lock & Slide Pins | Meets ISO standards and requirements |
| Slider Mechanism | Lock engagement ensured by two spring-loaded pins through main beams. Movement is facilitated by steel rollers. |
| ICC Bumper | 3/16″ x 4″ x 4″ tube step bumper. Two (2) rubber bumpers. |
| Landing Gear | Jost two speed AAR approved, square leg. 50,000 lb lift capacity and 140,000 lb static load capacity. |
| Landing Gear Axle Type | Standard |
| Landing Gear Foot Group | 10 in. by 10 in. Low profile sandshoe |
| Crank Handle Location | Curb side handle |
| Axle Quantity | Three Axles |
| Suspension | Spring-Ride |
| Axle Centers | 60 3/4 inches all axles |
| Springs | Mono Leaf |
| Hub Type | Hub piloted for disc wheels |
| Hub Material | Steel |
| Drum | Outboard mounted |
| Rim/Wheels | 8.25 X 22.5 hub piloted tubeless |
| Wheel/Rim Color | White |
| Tires | Cheetah Supplied |
| Tire Size | 11R 22.5 |
| Tire Inflation System | None |
| Axle Vendor | Meritor |
| Axle Type | TN |
| Wall Thickness | 1/2 inch |
| Axle Track | 71 ½ |
| Brake Lining Options | Standard |
| Lubrication | Oil 90 wt. |
| Slack Adjusters | Automatic |
| Brake System Type | 2S1M |
| Brake Chambers | 30/30 |
| Hubodometer | None |
| Electrical System | 12 volt, 7-way split pin receptacle plug; modular wiring harness |
| Light Attachment | Flange mounted |
| Light Type | LED |
| Mid-ship Turn Signal | Yes |
| Metal Preparation | Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning” |
| Primer | 70% Zinc Rich Primer |
| Topcoat | Urethane |
| Color | Black |
| Markings | FHWA plate, tare weight, 2 small Cheetah logos. |
| Customer Decals | Cheetah Supplied |
| Conspicuity | Meets DOT requirements |
| Registration Holder | Plastic with clear screw on top |
| Mud Flaps | Cheetah Supplied |
| Mud Flap Mounting | 4 mounting bolts |
| Steel & Fastners | All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 unless otherwise specified. All structural fasteners are Grade 5 or better and are zinc coated |
| GVWR | 71,400 lbs (20 ft) 75,000 lbs (40 ft) |
| Weight | Approximately 11,400 lbs |
