23 ½ Foot Straight Frame Container Chassis Specifications

New Chassis Made By Cheetah in USA.

Function Carries one 20ft (60,000 lbs capacity) or one 40ft (62,600 lbs capacity) or two empty 20ft ISO containers. Meets all DOT, TOFC, CMVSS, ANSI, SAF and TTMA specifications in effect at the time of manufacture and applicable in Canada.
Overall Length (Closed) 32ft 6in
(Extended) 40ft 6in
Overall Width 96″ (102″ over tires)
Tridem Location 89 5/8 from rear
Slide Range 97″
Kingpin Height 48″
Kingpin Location 12″ from rear face of front bolster
Maximum Rear Height 48″
Main Beams Fabricated I-Beam with high tensile steel flanges
Bogie Beams Fabricated I-Beam with high tensile steel flanges
Cross Member All cross members are formed from 7 ga steel
Upper Coupler Assembly Pick up plate is 5/16” thick and extends approximately 18” behind the kingpin and is reinforced fore and aft by 5/16″ formed channels
Bracing Lateral Bracing
Front Bolster Dual position
Front Intermediate Bolster Fabricated with retractable twistlocks
Hi-Lo intermediate Bolster Fabricated with swing down twistlocks.
Rear Bolster Fabricated beam with swing down twistlocks.
Twist Locks & Slide Pins Meets ISO standards and requirements
Slider Mechanism Lock engagement ensured by two air actuated pins through main beams. Movement is facilitated by steel rollers.
ICC Bumper 3/16″ x 4″ x 4″ tube step bumper
Two (2) rubber bumpers.
Landing Gear Two speed AAR approved, square leg. 50,000 lb lift capacity and 140,000 lb static load capacity.
Landing Gear Axle Type Standard
Landing Gear Foot Group 10″ x 10″ Low profile sandshoe
Crank Handle Location Curb side handle
Axle Quantity Three (3) axles
Axle Centers 60 3/4″
Springs Two Leaf
Hub Type Hub piloted for disc wheels
Hub Material Steel
Drum Outboard mounted
Rims/Wheel 8.25 X 22.5 hub piloted tubeless
Wheel/Rim Color White
Tires Cheetah Supplied
Tire Size 11R 22.5
Tire Inflation System None
Brake Lining Options Standard
Lubrication Oil 90 wt.
Brake System Type 2S1M
Hubodometer None
Electrical System 12 volt, 7-way split pin receptacle plug; modular wiring harness
Light Attachment Grommet mounted
Light Type LED
Metal Preparation Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning”
Primer 70% Zinc Rich Primer
Topcoat Urethane
Color Black
Markings FHWA plate, tare weight, 2 small Cheetah logos.
Customer Decals Furnished by Customer
Conspicuity Meets DOT requirements
Registration Holder Plastic with clear screw-on top
Mud Flaps Plastic anti sail
Steel & Fasteners All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 or better. All structural fasteners are Grade 5 or better and are zinc coated
GVWR 75,000 lbs. for 40 ft container
72,400 lbs. for 20 ft container
Weight Approximately 12,400 lbs.