42 Foot Tandem Axle Air Ride Double Drop Chassis Specifications
New Chassis Made By Cheetah in USA.
| Funtion | Carries one 20 ft ISO Container. Meets all DOT, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of chassis manufacture and applicable to operation in the United States. |
| Overall Chassis Length | 42 ft. |
| Overall Chassis Width | 102 inches |
| Tandem Location | 49 1/2 inches |
| Kingpin Location | 15 inches |
| Maximum Rear Height | 42 in. |
| Main Frame Width | 42 inch beam centers |
| Gooseneck Beams | Fabricated I-Beam |
| Center Beams | 10 inch deep fabricated I-Beam |
| Cross Member | Fabricated channels |
| Upper Coupler Assembly | Pick up plate is 5/16” thick and extends approximately 18” behind the kingpin and is reinforced fore and aft by ¼ inch formed channels |
| Bolsters | 6 inch x 8 inch structural tubing |
| Twist Lock & Slide Pins | Meets ISO standards and requirements. |
| ICC Bumper | 4 inch x 4inch x 3/16 inch Tube step bumper. |
| Landing Gear | Jost two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity. |
| Landing Gear Axle Type | Standard |
| Landing Gear Foot Group | 10 in. by 10 in. Low profile sandshoe |
| Crank Handle Location | Road side handle |
| Suspension | New Way |
| Axle Quantity | Two Axles |
| Axle Centers | 49 inch |
| Hub Type | Hub piloted for disc wheels |
| Hub Material | Steel |
| Drum | Outboard mounted |
| Rim/Wheels | 8 1/4 X 22.5 hub piloted tubeless |
| Wheel/Rim Color | White |
| Tires | Cheetah Supplied |
| Tire Size | 11R 22.5 |
| Tire Inflation System | None |
| Axle Type | TQ |
| Wall Thickness | 5/8 inch |
| Axle Track | 71.5 |
| Brake Lining Options | Standard |
| Lubrication | Oil 90 wt. |
| Slack Adjusters | Automatic |
| Brake System Type | 2S1M |
| Brake Chambers | 30/30 |
| Hubodometer | None |
| Electrical System | 12 volt, 7-way split pin receptacle plug; modular wiring harness |
| Light Attachment | Grommet mounted |
| Light Type | Incandescent |
| Metal Preparation | Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning” |
| Primer | 70% Zinc Rich Primer |
| Topcoat | Urethane Topcoat |
| Color | Black |
| Markings | FHWA plate, tare weight, 2 small Cheetah logos. |
| Customer Decals | Furnished by Customer |
| Conspicuity | Meets DOT requirements |
| Registration Holder | Plastic with clear screw on top |
| Mud Flaps | Cheetah Supplied |
| Mud Flap Mounting | 4 mounting bolts |
| Steel & Fastners | All structural steel is ASTM-A572, Grade 50, or ASTMA607, Grade 50. All structural fasteners are Grade 5 or better and are zinc coated |
| GVWR | 61,000 lbs |
| Weight | Approximately 10,660 lbs + 2% |
