40 Foot Gooseneck Lightweight Specifications
New Chassis Made By Cheetah in USA.
| Function | Carries one 40 ft ISO Container Meets all DOT, TOFC, AAR, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of manufacture and applicable to operation in the United States |
| Overall Length | 40ft. 6in. |
| Overall Width | 96 inches |
| Tandem Location | 49 inches |
| Kingpin Location | 24½ inches from the front (18 inches from the rear face of the front bolster). |
| Maximum Rear Height | 48 in. |
| Main Frame Width | 40 in. |
| Main Beams | Fabricated I-Beam with high tensile steel flanges |
| Gooseneck Beams | 5 ¼ inches deep fabricated I-Beam. |
| Cross Member | All cross members are formed from 10-gauge steel |
| Upper Coupler Assembly | Pick up plate is ¼” thick and extends approximately 18” behind the kingpin and is reinforced fore and aft by channels |
| Front Bolster | Fabricated channel 9 inches high x 6 inches deep with stiffeners |
| Rear Bolster | Box type with fabricated formed channel lower member |
| Twist Lock & Slide Pins | Meets ISO standards and requirements. |
| ICC Bumper | 4 inch x 4 inch Tube step bumper. |
| Landing Gear | UL500 Jost two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity. |
| Landing Gear Axle Type | Standard |
| Landing Gear Foot Group | 10 in. by 10 in. Low profile sandshoe |
| Crank Handle Location | Curb side handle |
| Axle Quantity | Two Axles |
| Suspension Type | Binkley Spring-Ride |
| Axle Centers | 49 inch |
| Springs | Mono Leaf |
| Hub Type | Hub piloted for disc wheels |
| Hub Material | Aluminum |
| Drum | Centrifuse |
| Rim/Wheels | 8 1/4 X 22.5 machine finished aluminum |
| Wheel/Rim Color | Aluminum |
| Tires | Cheetah supplied |
| Tire Size | 255/70R 22.5 |
| Tire Inflation System | None |
| Brake Lining Options | Standard |
| Lubrication | Oil 90 wt. |
| Brake System Type | 2S1M |
| Hubodometer | None |
| Electrical System | 12 volt, 7-way split pin receptacle plug; modular wiring harness |
| Light Attachment | Flange mounted |
| Light Type | LED |
| Metal Preparation | Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning” |
| Primer | 70% Zinc Rich Primer |
| Topcoat | Urethane Topcoat |
| Color | Black |
| Markings | FHWA plate, tare weight, 2 small Cheetah logos. |
| Customer Decals | Furnished by Customer |
| Conspicuity | Meets DOT requirements |
| Registration Holder | Plastic with clear screw on top |
| Mud Flaps | Plastic anti sail |
| Steel & Fasteners | All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 or better. All structural fasteners are Grade 5 or better and are zinc coated |
| GVWR | 65,000 lbs |
| Weight | Approximately 5,150 lbs. |
