PX 60 Concrete Panel Trailer Specifications

New Chassis Made By Cheetah in USA.
PX 60 Concrete Panel Trailer

Function Carries Panels two 32 ft x 12 in thick per side, Structurally designed for a maximum of 32,000lbs per side. Meets all DOT, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of manufacture and applicable to operation in the United States.
Chassis Height This trailer is designed to carry 12 ft 5 inch tall panels with a total overall height of 13 ft 6 inches. A 13 ft tall panel will have a height of 14 ft 1 inch.
Overall Chassis Length 51 ft. 8 in.
Overall Chassis Width 102 inches (over tires)
Tandem Location 54 3/4 inches
Kingpin Location 18 inches
Ground Clearance 9″
Main Beams A-Frame, channel, and 4″ x 4″ x 3/16″ tubing
Upper Coupler Assembly Pick up plate is 5/16 inch thick and extends approximately 19” behind the kingpin and is reinforced fore and aft by 8 inch formed channels
Walk Way None
Winches None
Straps None
Rear Deck Platform Steel diamond plate over suspension area
Horizontal Support Bars Front and rear
Panel Support Feet Fourteen 10″ x 22″ (inside)
Bumper 4 inch x 4inch x 3/16 inch tube step bumper
Landing Gear 50,000 lb. Lift capacity and 140,000 static load capacity
Landing Gear Axle Type Solid Axle
Landing Gear Foot Group 10 in. by 12 in. Low profile sandshoe
Crank Handle Location Road side handle
Rear Prop Leg None
Axle Quantity Two Axles 25K
Suspension Type Air-Ride with automatic dump and ride height over ride switch. (5″ of over ride)
Axle Centers 54 inch
Hub Type Hub piloted for disc wheels
Hub Material Steel
Drum Outboard mounted
Rims/Wheel 8 1/4 X 22.5 hub piloted tubeless
Wheel/Rim Color White
Tires Cheetah Supplied
Tire Size 295/75R 22.5
Tire Inflation System None
Brake Lining Options Standard
Lubrication Oil 90 wt.
Brake System Type 2S1M
Brake Chambers 30/30
Hubodometer None
Electrical System 12 volt, 7-way split pin receptacle plug; modular wiring harness
Light Attachment Flange mounted
Light Type LED
Metal Preparation Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning”
Primer 70% Zinc Rich Primer
Topcoat Urethane Topcoat
Color Black
Markings FHWA plate
Customer Decals Furnished by Customer
Conspicuity Meets DOT requirements
Registration Holder Plastic with clear screw on top
Mud Flaps Plastic anti sail
Steel & Fasteners All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50. All structural fasteners are Grade 5 or better and are zinc coated
GVWR 78,000 lbs
Weight Approximately 13,400 lbs
img-container-chassis-footer