28-40 Foot Extendable Pole Trailer Specifications

New Chassis Made By Cheetah in USA.
28-40 Foot Extendable Pole Trailer

Function Carries variable length (20′ – 40′) poles, maximum weight of 20,000 lbs evenly distributed
Overall Chassis Length (extended) 40 ft 6 inches
(closed) 28 ft 4 inches
Overall Chassis Width 96 inches
Axle Location 80 inches from rear
Draw Bar Height Adjustable, 25 3/8, 30 5/8, 35 7/8
Draw Bar Eye 2 1/2 inch, Premier 127F with dual safety chains
Frame Height Approximately 45 inches
Main Frame Width 40 in.
Main Beams Wide flange I-Beam 12 inch deep, 16 lb/ft, hot rolled
steel, ASTM A572-50
Extension Beams Wide flange I-beam 8 inch deep, 18 lb/ft hot rolled steel, ASTM A572-GR50
Cross Member All cross members are formed from 10-gauge steel.
Bolster ¼ x 4 x 4 x 68 inchs long tube with two position verticle
guide pockets set at 40 and 60 inches.
Vertical Guides 1/4 x 2 x 3 Steel tube, 20 inches above bolster
Frame Extension By telescopic action the chassis can be extended by 12′
2″. Security for the frame adjustment is accomplished
through two spring-loaded locking pins that ensure
positive engagement with the main frame.
ICC Bumper 4 inch x 4inch x 3/16 inch Tube step bumpe
Landing Gear Jost two speed AAR approved, square leg. 50,000 lb. lift
capacity and 140,000 static load capacity.
Landing Gear Axle Type Standard
Landing Gear Foot Group 10 in. by 10 in. Low profile sandshoe
Crank Handle Location Curb side handle
Suspension Hutch
Axle Quantity Single Axle
Suspension Type Spring-Ride
Springs Three Leaf
Hub Type Hub piloted for disc wheels
Hub Material Steel
Hub Manufacturer KIC
Drum Outboard mounted
Rim/Wheels 8 1/4 X 22.5 hub piloted tubeless
Wheel/Rim Color White
Rim Spacer None
Tires Cheetah Supplied
Tire Size 11R 22.5
Tire Inflation System None
Axle Vendor Meritor
Axle Type TN
Wall Thickness 1/2 inch
Axle Track 71.5
Brake Lining Options Standard
Lubrication Oil 90 wt.
Slack Adjusters Bendix 5 1/2 inch
Brake System Vendor WABCO
Brake System Type 2S1M
Brake Chambers Haldex
Hubodometer None
Electrical System 12 volt, 7-way split pin receptacle plug; modular wiring harness
Light Vendor TruckLite
Light Attachment Grommet mounted
Light Type LED
Metal Preparation Clean, dry steel and NACE No. 3 /SSPC-SP-6
“Commercial Blast Cleaning”
Primer 70% Zinc Rich Primer
Topcoat Urethane Topcoat
Color Black
Markings FHWA plate, tare weight, 2 small Cheetah logos.
Customer Decals Furnished by Customer
Conspicuity Meets DOT requirements
Credentials AAR Certification
Registration Holder Plastic with clear screw on top
Mud Flaps Cheetah Supplied
Mud Flap Mounting 4 mounting bolts
Fenders Plastic, over rear axle
Winches None
Straps None
Steel & Fastners All structural steel is ASTM-A572, Grade 50, or ASTMA607,
Grade 50. All structural fasteners are Grade 5 or
better and are zinc coated
GVWR 28,000 lbs
Weight Approximately 6,250 lbs. + 2%