20 – 40 Foot Heavy Duty HD Flip Up Rear Twist locks Container Chassis Specifications
New Chassis Made By Cheetah in USA.
| Function | Carries one 20 ft (60,000 lbs) or one 40 ft (63,600 lbs) ISO container. Meets all DOT, TOFC, CMVSS, ANSI, SAE and TTMA specifications in effect at the time of manufacture and applicable to operation in Canada. |
| Overall Length | (Closed) 32ft 5in (Extended) 40ft 7in |
| Overall Width | 96″ (102″ over axles) |
| Tridem Location | 89 5/8″ |
| Slide Range | 98″ Total |
| Kingpin Height | 47″ |
| Kingpin Location | 12″ from rear face of front bolster |
| Maximum Rear Height | 48″ |
| Main Beams | Fabricated I-Beam with high tensile steel flanges |
| Bogie Beams | Fabricated I-Beam with high tensile steel flanges |
| Cross Member | All cross members are formed from 7 ga steel |
| Upper Coupler Assembly | Pick up plate is 5/16” thick and extends approximately 18” behind the kingpin and is reinforced fore and aft by 1/4″ formed channels |
| Bracing | Lateral Bracing |
| Front Bolster | 9″ high x 6″ deep channel |
| Intermediate Bolsters | Fwd: 6″ x 8″ tube Rwd: Fabricated box-type bolster with 1/2″” end plates & retractable twistlocks on each” |
| Rear Bolster | Fabricated box type I-beam with swing down twistlocks. |
| Twist Locks & Slide Pins | Meets ISO standards and requirements |
| Slider Mechanism | Lock engagement ensured by two air actuated pins through main beams. Movement is facilitated by steel rollers. |
| ICC Bumper | 3/16″ x 4″ x 4″ x 42″ tube step bumper. Two (2) rubber bumpers. |
| Landing Gear | Two speed AAR approved. 50,000 lb. lift capacity and 140,000 static load capacity. |
| Landing Gear Axle Type | Standard |
| Landing Gear Foot Group | 10″ x 10″ Low profile sandshoe |
| Crank Handle Location | Road side handle |
| Axle Quantity | Three (3) axles |
| Suspension | Spring-Ride |
| Axle Centers | 60 3/4″ all axles |
| Springs | Mono Leaf |
| Hub Type | Hub piloted for disc wheels |
| Hub Material | Steel |
| Drum | Outboard mounted |
| Rims/Wheel | 8.25 X 22.5 hub piloted tubeless |
| Wheel/Rim Color | White |
| Tires | Cheetah Supplied |
| Tire Size | 11R 22.5 |
| Tire Inflation System | None |
| Brake Lining Options | Standard |
| Lubrication | Oil 90 wt. |
| Brake System Type | 2S1M |
| Brake Chambers | 30/30 |
| Hubodometer | None |
| Electrical System | 12 volt, 7-way split pin receptacle plug; modular wiring harness |
| Light Attachment | Flange mounted |
| Light Type | LED |
| Midship Turn Signal | None |
| Metal Preparation | Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning” |
| Primer | 70% Zinc Rich Primer |
| Topcoat | Urethane |
| Color | Black |
| Markings | FHWA decal, tare weight, 2 small Cheetah logos. |
| Customer Decals | Furnished By Customer |
| Conspicuity | Meets DOT requirements |
| Registration Holder | Plastic with clear screw-on top |
| Mud Flaps | Plastic anti sail |
| Steel & Fasteners | All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 or better. All structural fasteners are Grade 5 or better and are zinc coated |
| GVWR | 71,400 lbs. 20 ft 75,000 lbs. 40 ft |
| Weight | Approximately 11,600 lbs. |
